Application range:
This equipment performs pressure test and dry constant temperature treatment on electrical and electronic products and other products, materials and parts under normal pressure or low pressure.
Features:
With the digital technology of simulation engineering to control the
vacuum degree and automatic digital displayed by the electromagnetic valve, provides
you more accurate and effective vacuum control. Through the panel, the vacuum
is adjustable from 0.01 kPa to 99.99 KPa, and the adjustable precision is 0.01
KPa. The sensor uses a resistive silicon tube pressure sensor to ensure a
stable pressure value, independent of the air flow, and to transmit a stable
pressure value to the LED display of the vacuum controller. With the
corresponding high-power vacuum pump, the vacuum in the vacuum box can reach
the military level below 10Pa.
product structure:
◎Box structure
1) The vacuum oven consists of a chamber body, a vacuum system, a protection system, and an electrical control system.
2) The cabinet is made of mechanical equipment, with advanced technology, smooth lines and beautiful appearance.
3) The inner box is made of 3mm thick stainless steel wire drawing plate, which is polished and strengthened to strengthen it. The outer box is made of 1.2mm thick cold-rolled steel sheet which is electrostatically sprayed after special treatment on the surface.
4) High-performance sealing material and silicone rubber sealing structure are used between the door and the door frame of the oven to ensure good sealing and aging resistance.
5) The vacuum system consists of a vacuum pump, a stainless steel vacuum valve, a stainless steel connecting pipe and a digital vacuum gauge.
6) The stainless steel movable sample holder is installed in the box, which is detachable and easy to clean.
7) Tempered on the door of the cabinet, bulletproof double-glazed door observation window, glass window installed in the middle of the box door, can clearly observe the changes of the internal test items during the test.
◎vacuum system
The studio is a confined space connected to a vacuum pump and pressure sensor via a vacuum line. The vacuum pump continuously works to extract the gas in the working chamber, and the pressure in the working chamber will be less and less than the standard atmospheric pressure to achieve the required vacuum. The vacuum pump is equipped with a gas ballast valve. When the pump is used to pump steam, make sure the gas ballast valve is open.
◎ control panel
An operational control platform for human-machine dialogue. Equipped with pressure display instrument, intake solenoid valve switch, etc.
◎Power distribution control cabinet
Equipped with distribution board bottom plate, main power leakage circuit breaker, etc.
◎ Pressure control method
Automatic control, pressure value can be set
Manual control, vacuum pump is often pumped, manually stopped when needed
◎ Pressure measurement and display
Japan imported "Fuji" digital pressure gauge, pressure sensor.
◎vacuum pump
The vacuum pump uses high quality low noise rotary vane vacuum pump.
Electrical control system
1) The electric control part adopts “Zhengtai” AC contactor, thermal relay
2) Other components
3) The circuit design is novel, reasonable wiring, safe and reliable
4) The middle part of the box is an electric control cabinet, which is convenient for centralized inspection and maintenance.
Technical Parameters:
Power supply voltage:AC220V±10%/50Hz±2%
Input power:2400W
Temperature control range:RT+10℃-250℃
Temperature resolution:0.1℃
Temperature fluctuation:≤±0.5℃
Vacuum degree adjustable range:0.10KPa-99.99KPa
Volume:90L
Workroom size (mm):450*450*450
Dimensions (mm):615*590*1470
Carrier bracket:2 blocks
Timing range:0-9999 minutes
Equipped with vacuum pump: Yes
Remarks: This paragraph is a vertical vacuum drying oven with a working chamber above and a vacuum pump toolbox below. The standard configuration is a rotary vane vacuum pump. If the vacuum is controlled below 100Pa, please contact us. Our company can customize ultra-low vacuum equipment with a vacuum of 4Pa.
1. Can you customize the product?
Yes, we can customize any products according to customer’s requirements.
2. Which payment terms are you doing?
T/T (Bank telegraphic transfer,100% payment in advance.).
PayPal (Paypal only pay less than $500, and must be transported by Express.).
West Union.
3. Which shipment is available?
Sea freight, air transport, rail transport, international express or as your requirements.
4. Which country you have been exported?
Our products have been exported to many countries, more than 100 countries and regions around the world.
5. How long is the delivery time?
It’s about 7-20 days.
6、What trade methods do you offer?
The trade methods we support are FOB, FCA, CIF,EXW,DDU.